The production of elbows takes place both with cold forming, in the Tecninox plant (Piacenza) and in Tecninox do Brasil (Brazil), and by hot forming in Petrol Raccord (Piacenza).
The wide range of materials we offer – from austenitic stainless steel, to super austenitics, to Titanium, to Nickel alloys, etc. – meets the demands of the most critical applications, from the chemical industry, to petrochemicals, offshore platforms, shipbuilding, energy production.
All our elbows are produced in accordance with quality and current technical standards (ASTM / ASME / ANSI) and are available in a wide range of thicknesses, grades and sizes (from ½” to 56″).
Our deep-rooted experience as manufacturers allows us to offer standard elbows, but also tailor-made ones, to customer’s drawing.
45°, 60°, 90°, angles on request
short radius (SR), long radius (LR), radius on request
Sch10, Sch20, Sch30, STD, Sch40, Sch60, XS, Sch.80, Sch.100, Sch.120, Sch.140, Sch.160, XXS (ASME B36.10) / Sch.5S, Sch.10S, Sch.40S, Sch.80S (ASME B36.19) / thickness on request (nominal thickness / minimum thickness / particular tolerances)
austenitic stainless steel (WP 304/304L; WP316/316L; WP 321/321H; WP 304/304H; WP 347/347H), alloy steel (WP5, WP9, WP11, WP22, WP91, WP92), carbon steel, Duplex and Super Duplex (UNS S31803/S32205; UNS S32760; UNS S32750), Nickel alloys (UNS N06625; UNS N08825), Titanium (TI GR 2), 6MO (UNS S31254), UREA (WP 316L UG; 25.22.2 / UNS S31050)
ASTM/ASME A234/A234M, A403/A403M, A420/A420M, A815/A815M, B363, B366/B366M
shipyards, nuclear, power gen, chemical, pharmaceutical, desalination, fertilizers, green chem, oil&gas, offshore, petrochemical, renewable energy (solar, wind farm, geothermal, etc.)
Dimensions to ANSI B16.25 (short radius elbows to ANSI B16.28)
From production and from stock
Hot forming and cold forming
Manufacturing of pieces according to customer's drawing